| 1-Press Pull.f3d | 55.5 KB | ||
| 1. ANIMATION INTERFACE DESCRIPTION.mp4 | 14.2 MB | ||
| 1. ANIMATION INTERFACE DESCRIPTION.srt | 2.6 KB | ||
| 1. CONSTRUCTION PLANES 1.mp4 | 43.9 MB | ||
| 1. CONSTRUCTION PLANES 1.srt | 3.6 KB | ||
| 1. DECAL.mp4 | 19.8 MB | ||
| 1. DECAL.srt | 1 KB | ||
| 1. DRAWING WORKSPACE AND VIEWS.mp4 | 33 MB | ||
| 1. DRAWING WORKSPACE AND VIEWS.srt | 4.2 KB | ||
| 1. FLANGE.mp4 | 103.8 MB | ||
| 1. FLANGE.srt | 6.9 KB | ||
| 1. LINE RECTANGLE CIRCLE.mp4 | 28.4 MB | ||
| 1. LINE RECTANGLE CIRCLE.srt | 3.5 KB | ||
| 1. MEASURE INTERFERENCE CURVATURE COMB ANALYSIS.mp4 | 29.2 MB | ||
| 1. MEASURE INTERFERENCE CURVATURE COMB ANALYSIS.srt | 2.3 KB | ||
| 1. NEW COMPONENT.mp4 | 22.7 MB | ||
| 1. NEW COMPONENT.srt | 1.5 KB | ||
| 1.1 1-Construction Planes 1.f3d | 64 KB | ||
| 1.1 1-Decal.f3d | 19.4 MB | ||
| 1.1 1-Flange.f3d | 159.1 KB | ||
| 1.1 1-Measure + Interference + Curvature Comb Analysis.f3d | 3.7 MB | ||
| 1.1 1-New Compenent.f3d | 781.8 KB | ||
| 10-Split Body.f3d | 96.2 KB | ||
| 10. EXTRUDE.mp4 | 48 MB | ||
| 10. EXTRUDE.srt | 5.4 KB | ||
| 11-Silhoutte Split.f3d | 70.8 KB | ||
| 11. REVOLVE.mp4 | 29.7 MB | ||
| 11. REVOLVE.srt | 2.8 KB | ||
| 12-Move-Copy.f3d | 552.1 KB | ||
| 12. SWEEP.mp4 | 36.2 MB | ||
| 12. SWEEP.srt | 2.9 KB | ||
| 13-Align.f3d | 149.9 KB | ||
| 13. LOFT.mp4 | 32.2 MB | ||
| 13. LOFT.srt | 2.6 KB | ||
| 14-Appearance.f3d | 194.1 KB | ||
| 14. RIB.mp4 | 22.3 MB | ||
| 14. RIB.srt | 1.6 KB | ||
| 15-Pyhsical Material.f3d | 122.6 KB | ||
| 15. WEB.mp4 | 28.3 MB | ||
| 15. WEB.srt | 1.9 KB | ||
| 16. HOLE THREAD.mp4 | 36.5 MB | ||
| 16. HOLE THREAD.srt | 2.8 KB | ||
| 17. BOX.mp4 | 16.2 MB | ||
| 17. BOX.srt | 1.6 KB | ||
| 18. CYLINDER.mp4 | 13.1 MB | ||
| 18. CYLINDER.srt | 1.7 KB | ||
| 19. SPHERE.mp4 | 11.8 MB | ||
| 19. SPHERE.srt | 1.3 KB | ||
| 2. ARC POLYGON.mp4 | 19.3 MB | ||
| 2. ARC POLYGON.srt | 2 KB | ||
| 2. ATTACHED CANVAS.mp4 | 10.3 MB | ||
| 2. ATTACHED CANVAS.srt | 819.2 B | ||
| 2. BEND.mp4 | 47.8 MB | ||
| 2. BEND.srt | 2.7 KB | ||
| 2. CONSTRUCTION PLANES 2.mp4 | 34.9 MB | ||
| 2. CONSTRUCTION PLANES 2.srt | 2.5 KB | ||
| 2. JOINT.mp4 | 93.4 MB | ||
| 2. JOINT.srt | 5.1 KB | ||
| 2. MODIFY.mp4 | 11.2 MB | ||
| 2. MODIFY.srt | 1.5 KB | ||
| 2. STORYBOARD AND TRANSFORM.mp4 | 28.2 MB | ||
| 2. STORYBOARD AND TRANSFORM.srt | 4.5 KB | ||
| 2. ZEBRA ANALYSIS DRAFT ANALYSIS CURVATURE MAP ANALYSIS.mp4 | 57.7 MB | ||
| 2. ZEBRA ANALYSIS DRAFT ANALYSIS CURVATURE MAP ANALYSIS.srt | 3.7 KB | ||
| 2.1 2-Bend.f3d | 136 KB | ||
| 2.1 2-Construction Planes 2.f3d | 1.1 MB | ||
| 2.1 2-Joint.f3d | 942.6 KB | ||
| 2.1 2-Zebra Analysis + Draft Analysis + Curvature Map Analysis_1.f3d | 37.5 KB | ||
| 2.2 2-Zebra Analysis + Draft Analysis + Curvature Map Analysis_2.f3d | 551.1 KB | ||
| 2.3 2-Zebra Analysis + Draft Analysis + Curvature Map Analysis_3.f3d | 18.2 MB | ||
| 20. TORUS.mp4 | 16.4 MB | ||
| 20. TORUS.srt | 1.4 KB | ||
| 21. COIL.mp4 | 23.2 MB | ||
| 21. COIL.srt | 2.1 KB | ||
| 22. PIPE.mp4 | 26.8 MB | ||
| 22. PIPE.srt | 1.9 KB | ||
| 23. RECTANGULAR PATTERN.mp4 | 20 MB | ||
| 23. RECTANGULAR PATTERN.srt | 1.7 KB | ||
| 24. MIRROR.mp4 | 16.4 MB | ||
| 24. MIRROR.srt | 1.3 KB | ||
| 25. THICKEN.mp4 | 20.7 MB | ||
| 25. THICKEN.srt | 1.6 KB | ||
| 26. BOUNDARY FILL.mp4 | 27.4 MB | ||
| 26. BOUNDARY FILL.srt | 1.7 KB | ||
| 27. PRESS PULL.mp4 | 12.3 MB | ||
| 27. PRESS PULL.srt | 1 KB | ||
| 28. FILLET.mp4 | 24.8 MB | ||
| 28. FILLET.srt | 2.3 KB | ||
| 28.1 Fillet.html | 102.4 B | ||
| 29. CHAMFER.mp4 | 18 MB | ||
| 29. CHAMFER.srt | 1.4 KB | ||
| 3-Chamfer.f3d | 127.1 KB | ||
| 3. AS BUILT JOINT.mp4 | 46.2 MB | ||
| 3. AS BUILT JOINT.srt | 2.1 KB | ||
| 3. CONSTRUCTION PLANES 3.mp4 | 28.4 MB | ||
| 3. CONSTRUCTION PLANES 3.srt | 2.4 KB | ||
| 3. ELLIPSE SLOT.mp4 | 17.2 MB | ||
| 3. ELLIPSE SLOT.srt | 2.1 KB | ||
| 3. EXPLODE AND APPEARANCE.mp4 | 22.6 MB | ||
| 3. EXPLODE AND APPEARANCE.srt | 3.5 KB | ||
| 3. GEOMETRY.mp4 | 9.2 MB | ||
| 3. GEOMETRY.srt | 1.7 KB | ||
| 3. INSERT MCMASTER CARR COMPONENT INSERT A MANUFACTURER PART.mp4 | 25.1 MB | ||
| 3. INSERT MCMASTER CARR COMPONENT INSERT A MANUFACTURER PART.srt | 2.5 KB | ||
| 3. SECTION ANALYSIS CENTER OF MASS COMPONENT COLOR CYCLING TOGGLE.mp4 | 29.7 MB | ||
| 3. SECTION ANALYSIS CENTER OF MASS COMPONENT COLOR CYCLING TOGGLE.srt | 2.2 KB | ||
| 3. UNFOLD.mp4 | 17.7 MB | ||
| 3. UNFOLD.srt | 1 KB | ||
| 3.1 3- Section Analysis + Center Of Mass + Component Color Cycli.f3d | 3.7 MB | ||
| 3.1 3-Construction Planes 3.f3d | 65.8 KB | ||
| 3.1 3-Unfold.f3d | 247.6 KB | ||
| 30. SHELL.mp4 | 17.8 MB | ||
| 30. SHELL.srt | 1.3 KB | ||
| 31. DRAFT.mp4 | 15.9 MB | ||
| 31. DRAFT.srt | 1.1 KB | ||
| 32. SCALE.mp4 | 21.3 MB | ||
| 32. SCALE.srt | 1.5 KB | ||
| 33. COMBINE.mp4 | 47.8 MB | ||
| 33. COMBINE.srt | 3.1 KB | ||
| 34. OFFSET FACES REPLACE FACES.mp4 | 21.9 MB | ||
| 34. OFFSET FACES REPLACE FACES.srt | 1.7 KB | ||
| 35. SPLIT FACE.mp4 | 18 MB | ||
| 35. SPLIT FACE.srt | 1.7 KB | ||
| 36. SPLIT BODY.mp4 | 14.6 MB | ||
| 36. SPLIT BODY.srt | 1 KB | ||
| 37. SILHOUTTE SPLIT.mp4 | 18.4 MB | ||
| 37. SILHOUTTE SPLIT.srt | 1.3 KB | ||
| 38. MOVE COPY.mp4 | 35.2 MB | ||
| 38. MOVE COPY.srt | 2 KB | ||
| 39. ALIGN.mp4 | 17 MB | ||
| 39. ALIGN.srt | 1 KB | ||
| 4-Shell.f3d | 65.5 KB | ||
| 4. ANNOTATION, CAMERA, SAVE.mp4 | 20.9 MB | ||
| 4. ANNOTATION, CAMERA, SAVE.srt | 2.5 KB | ||
| 4. CONSTRUCTION AXIS 1.mp4 | 25.2 MB | ||
| 4. CONSTRUCTION AXIS 1.srt | 2 KB | ||
| 4. CREATE FLAT PATTERN.mp4 | 16.8 MB | ||
| 4. CREATE FLAT PATTERN.srt | 1.5 KB | ||
| 4. DIMENSION 1.mp4 | 7 MB | ||
| 4. DIMENSION 1.srt | 1.3 KB | ||
| 4. INSERT MESH SVG DXF.mp4 | 11.8 MB | ||
| 4. INSERT MESH SVG DXF.srt | 819.2 B | ||
| 4. JOINT ORIGIN.mp4 | 19.6 MB | ||
| 4. JOINT ORIGIN.srt | 1.4 KB | ||
| 4. SPLINE CONIC CURVE.mp4 | 27.4 MB | ||
| 4. SPLINE CONIC CURVE.srt | 2.3 KB | ||
| 4.1 4-Construction Axis1.f3d | 75.3 KB | ||
| 4.1 4-Create Flat Pattern.f3d | 159.2 KB | ||
| 4.1 4-Joint Origin.f3d | 41 KB | ||
| 40. APPEARANCE.mp4 | 22 MB | ||
| 40. APPEARANCE.srt | 1.6 KB | ||
| 41. PHYSICAL MATERIAL.mp4 | 26.1 MB | ||
| 41. PHYSICAL MATERIAL.srt | 2.1 KB | ||
| 5-Draft.f3d | 454.3 KB | ||
| 5. CONSTRUCTION AXIS 2.mp4 | 25.5 MB | ||
| 5. CONSTRUCTION AXIS 2.srt | 2.3 KB | ||
| 5. DIMENSION 2.mp4 | 7.2 MB | ||
| 5. DIMENSION 2.srt | 1.2 KB | ||
| 5. POINT TEXT.mp4 | 14.9 MB | ||
| 5. POINT TEXT.srt | 1.1 KB | ||
| 5. RIGID GROUP.mp4 | 33.6 MB | ||
| 5. RIGID GROUP.srt | 2.2 KB | ||
| 5. SHEET METAL RULES.mp4 | 16.2 MB | ||
| 5. SHEET METAL RULES.srt | 1.6 KB | ||
| 5.1 5-Construction Axis2.f3d | 38.3 KB | ||
| 5.1 5-Rigid Group.f3d | 497.9 KB | ||
| 6-Scale.f3d | 155.1 KB | ||
| 6. CONSTRUCTION POINTS 1.mp4 | 26.3 MB | ||
| 6. CONSTRUCTION POINTS 1.srt | 2 KB | ||
| 6. DRIVE JOINTS.mp4 | 12.9 MB | ||
| 6. DRIVE JOINTS.srt | 1 KB | ||
| 6. TEXT AND SYMBOLS.mp4 | 9.9 MB | ||
| 6. TEXT AND SYMBOLS.srt | 2 KB | ||
| 6. TRIM EXTEND BREAK.mp4 | 16.1 MB | ||
| 6. TRIM EXTEND BREAK.srt | 2 KB | ||
| 6.1 6-Construction Points 1.f3d | 50.8 KB | ||
| 7-Combine.f3d | 49.9 KB | ||
| 7. CIRCULAR PATTERN RECTANGULAR PATTERN.mp4 | 57.3 MB | ||
| 7. CIRCULAR PATTERN RECTANGULAR PATTERN.srt | 4.9 KB | ||
| 7. CONSTRUCTION POINTS 2.mp4 | 28.5 MB | ||
| 7. CONSTRUCTION POINTS 2.srt | 2.8 KB | ||
| 7. DRAWING FROM ANIMATION.mp4 | 18.9 MB | ||
| 7. DRAWING FROM ANIMATION.srt | 3.2 KB | ||
| 7. MOTION LINK.mp4 | 34.2 MB | ||
| 7. MOTION LINK.srt | 2.1 KB | ||
| 7.1 7-Construction Points 2.f3d | 41 KB | ||
| 7.1 7-Motion Link.f3d | 980.9 KB | ||
| 8-Offset Faces.f3d | 61.8 KB | ||
| 8. CONTACT SETS.mp4 | 43.1 MB | ||
| 8. CONTACT SETS.srt | 3 KB | ||
| 8. FILLET MIRROR.mp4 | 18.7 MB | ||
| 8. FILLET MIRROR.srt | 2.7 KB | ||
| 8. TABLES AND EXPORT PDF.mp4 | 12 MB | ||
| 8. TABLES AND EXPORT PDF.srt | 1.8 KB | ||
| 8.1 8-Contact Sets.f3d | 176.2 KB | ||
| 9-Split Faces.f3d | 105.1 KB | ||
| 9. MOTION STUDY.mp4 | 79.5 MB | ||
| 9. MOTION STUDY.srt | 5.2 KB | ||
| 9. OFFSET SKETCH SCALE PROJECTS.mp4 | 43.1 MB | ||
| 9. OFFSET SKETCH SCALE PROJECTS.srt | 4.3 KB | ||
| 9.1 9-Motion Study.f3d | 980.1 KB | ||
| Bonus Resources.txt | 307.2 B | ||
| Get Bonus Downloads Here.url | 204.8 B | ||
| ▲ 203 total files | |||
Autodesk Fusion 360 Basic Modelling Techniques
Genre: eLearning | MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 2.17 GB | Duration: 3h 41m
Autodesk Fusion 360 Basic Modelling Techniques
What you'll learn
You will learn basic 2D drawing techniques in Autodesk Fusion 360 software.
You will learn basic 3D modeling techniques in Autodesk Fusion 360 software.
You will learn basic assembly animation techniques in Autodesk Fusion 360 software.
You will learn sheet metal techniques in Autodesk Fusion 360 software.
You will learn animation techniques in Autodesk Fusion 360 software.
You will learn technical drawing techniques in Autodesk Fusion 360 software.
Description
You will meet the advantages of working independently of space and time with the innovative cloud-based CAD-CAM-CAE and rendering platform Fusion 360. In this course, you will create design data and obtain rendering and technical drawing data with Fusion 360, which offers mechanical design and industrial design capabilities together. With the cloud-based innovative technology Fusion 360, your data will always be up to date, and your versions and revisions will be kept automatically.
Fusion 360 is a cloud-based 3D CAD, CAM,CAE and PCB platform for product development. It combines industrial and mechanical design, collaboration and metalworking in one package. The tools in Fusion 360 allow quick and easy exploration of design ideas with an integrated concept-production toolset. Fusion 360 is written for use with both MAC and PC, allowing you to use one or two of your preferred operating systems at no additional cost.
Using the same CAM core as Fusion 360's HSMWorks and Inventor HSM™, its CAM capabilities allow you to quickly produce toolpaths that reduce cycle times, reduce machine and tool wear, and produce the highest quality finished parts.
| torrent name | size | uploader | age | seed | leech |
|---|---|---|---|---|---|
| 2.9 GB | freecoursewb | 4 months | 4 | 1 | |
|
Udemy - BIM 4D Simulations Autodesk Revit, Dynamo, Navisworks and Max Posted by
freecoursewb in Other
|
1.1 GB | freecoursewb | 4 months | 6 | 1 |
| 1 MB | freecoursewb | 1 year | 0 | 0 | |
| 4.28 GB | Samiruskananus | 1 year | 17 | 0 | |
| 964.7 MB | freecoursewb | 1 year | 5 | 1 |
All Comments